Please select the desired section
Dukungan Pelanggan ROUTE 66 dapat dihubungi sebagai berikut:
16 frequently asked questions (FAQs)
* Browse the frequently asked questions of this product
* Subscribe to automatic notifications about new answers
* Rate our answers
* Send us feedback
* Subscribe to our Newsletter
It is possible to calculate a route over sea, but at the moment, none of the ROUTE 66 applications can skip segments of calculated routes. In order to find out only the number of kilometers that must be driven, the distance by ferry can be subtracted from the entire route distance.
The route recalculation occurs due to a traffic information update, or when a detour from the initially planned route was done.
The User Manual is available in digital format (on the CD/DVD) in the ROUTE 66 package.
The User Manual is also available for download on the ROUTE 66 website in the “Support – Manuals” section.
Yes, the Pedestrian navigation mode is available in the ROUTE 66 products.
You must take into consideration that the quality of the navigation instructions for pedestrians is lower than the quality of instructions for car navigation. This is caused by limitations of the GPS system, not by limitations of the ROUTE 66 Mobile software. When moving on foot, the motion is more “Stop/Go” and the speed is generally low. This results in larger uncertainties in the directional information reported by the GPS receiver, on which the ROUTE 66 software depends for making correct and timely navigation instructions.
You can search for an address by using any of the following combinations:
- by street name and city name
- by house number and street name
- by street name and postcode
- by postcode and city name
Please note that the ROUTE 66 application does not use the full postcode to search for cities. Please enter a part of the postcode (a 4 digit number) as search string.
The "ROUTE 66 Mobile" License is non-exclusive and non-transferable.
Searching for a place or destination by latitude and longitude is not available for this ROUTE 66 product.
Unfortunately the option of installing other maps using a Mac is not available. You must have a Windows based PC with a USB interface (+ memory card reader and writer) in order to install another map.
The percentage means that inside a tunnel or in urban areas, the speed will be % of the normal speed.
The normal speed is the speed set for the road where the tunnel is.
Example: The user is on a major road and the speed is set to 80km/h. The road goes trough a tunnel/urban area. The speed on this road segment will be % of 80km/h.
The speed values which are defined in Change settings > Speed are used when approximating time of arrival.
The customer should make sure that the 'Avoid motorways' option is set to OFF in 'Change settings'.
Please note that the map data is collected and provided by NavTeq. There might be name inconsistencies due to the database limitation.
However, we recommend you the following:
1. When you search an address, please enter as many keywords as possible. The more keywords you write, the more filtered the list of results is.
2. If you use as search keywords generic names like "street", "road", "avenue", but the list of results is empty, use the abbreviations of these, such as "st", "av", "rd".
3. Use blanks between keywords.
Yes, it can.
The customer can use the new map and new application version with the History information that was created with a previous map and software version.
The customer has to save the 'Favourites' file and use it with the new memory card image (paste it to the memory card after having installed the new software and new map).
In order to add music you need to have the Chicago device connected to your PC and Microsoft Active Sync installed. You can find Microsoft Active Sync at the following link:
Briefly press the power button to turn on and off your device.
When you press the power button to turn off the unit, your device actually enters a suspend state and the system stops operating. Once you turn on the system again, it resumes.
NOTE: In case you turn off the power by pressing the power button for 6 seconds, you will need to press the power button for 6 seconds again for turning on. You will then see the initial start up screen.
1. Make sure that power is supplied to your device.
2. For the initial start up, press the power button for 6 seconds to turn on your
NOTE: For normal operation, briefly press the power button to turn on and off your device.
To make sure that the touchscreen of your device works properly, please calibrate your screen when necessary. Calibrating means adjusting the precision and reaction of the screen.
1. Tap Main menu > Settings > Calibrate screen.
2. Tap the cross icon in the center of the screen. Then tap 4 more times, in the four corners of the screen.